Indoor Air Quality Products

Features and Benefits

---

Better Application Solution

• Maintains ASHRAE 62-2004 fresh-air requirements while controlling room humidity levels.
• Dehumidification cycle is activated based on humidity levels, not temperature, for better control.
• Available only on Energence™ rooftop units.

Single-Compressor Dehumidification Sequence

• The Prodigy™ unit controller initiates dehumidification when the room temperature is satisfactory but humidity is above the desired setpoint.
• The fans and compressors are started and both the reheat and evaporator coils are activated.
• The mixed indoor/outdoor air is cooled and dehumidified as it passes through the evaporator coil.
• The cooled and dehumidified air is heated back to near room temperature as it passes through the hot-gas reheat coil.
• The unit will continue to operate in this mode until the dehumidification demand is satisfied.

Two-Compressor Dehumidification Sequence

• The Prodigy™ unit controller initiates dehumidification when the room temperature is satisfactory but humidity is above the desired setpoint.
• The fans and compressors are started and both the reheat and evaporator coils are activated.
• The mixed indoor/outdoor air is cooled and dehumidified as it passes through the evaporator coil.
• The cooled and dehumidified air is heated back to near room temperature as it passes through the hot-gas reheat coil.
• The unit will continue to operate in this mode until the dehumidification demand is satisfied.